Introduction:
The Mariner's Astrolabe was used to determine the latitude of a ship at sea by measuring the noon altitude of the Sun or the meridian altitude of a star of known declination.
How it is used ?
It was not possible to determine longitude at sea in the early days of transoceanic navigation, but it was quite easy to determine latitude. To go to a place of known latitude, the ship was sailed to that latitude and then sailed east or west along the latitude line until the place was reached. To find the latitude of the ship at sea, the noon altitude of the Sun was measured during the day or the altitude of a star of known declination was measured when it was on the meridian (due north or south) at night. The Sun's or star's declination for the date was looked up in an almanac. The latitude is then 90° - measured altitude + declination . The Mariner's Astrolabe, which was popular in the late 15th and early 16th centuries, was a simple brass ring, graduated in degrees with a rotating alidade for sighting the Sun or a star. The ring was cast brass, quite heavy and cut away to keep it from blowing around in the wind. It was not a very good instrument and errors of four or five degrees were common.
It should be noted that any instrument used to measure altitudes above the horizon can be called an astrolabe.
The mariner's astrolabe in the template is shown below:
![[Mariner's
Astrolabe Template]](http://www.astrolabes.org/marfig.gif)
The Mariner's Astrolabe was used to determine the latitude of a ship at sea by measuring the noon altitude of the Sun or the meridian altitude of a star of known declination.
It was not possible to determine longitude at sea in the early days of transoceanic navigation, but it was quite easy to determine latitude. To go to a place of known latitude, the ship was sailed to that latitude and then sailed east or west along the latitude line until the place was reached. To find the latitude of the ship at sea, the noon altitude of the Sun was measured during the day or the altitude of a star of known declination was measured when it was on the meridian (due north or south) at night. The Sun's or star's declination for the date was looked up in an almanac. The latitude is then 90° - measured altitude + declination . The Mariner's Astrolabe, which was popular in the late 15th and early 16th centuries, was a simple brass ring, graduated in degrees with a rotating alidade for sighting the Sun or a star. The ring was cast brass, quite heavy and cut away to keep it from blowing around in the wind. It was not a very good instrument and errors of four or five degrees were common.
It should be noted that any instrument used to measure altitudes above the horizon can be called an astrolabe.
The mariner's astrolabe in the template is shown below:
Reference: http://www.astrolabes.org/mariner.htm
No comments:
Post a Comment